Category: Biomass

The process flow of an RDF pellet production line shares some similarities with the briquetting process but has key differences. Here’s a breakdown: 1. Pre-treatment: Shredding: Similar to Pellet, the starting point involves shredding raw RDF to a consistent size, usually below 80mm. Sorting and separation: Similar to Pellet, non-combustible materials like metal and glass are removed through various techniques. Drying: Unlike Pellet, drying is almost always essential for pellet production. High moisture content (above 10%) hinders binding and reduces pellet quality. Drying methods include rotary dryers, drum dryers, or fluidi [...]

There are several reasons why someone might choose to make an RDF pellet or briquette: Improved Handling: Reduced volume: Pellets and briquettes are much denser than loose RDF, which makes them easier to store, transport, and feed into combustion equipment. This can significantly reduce associated costs and improve efficiency. Reduced dust: Loose RDF can be dusty and difficult to handle, posing concerns for workers and the environment. Pelletizing or briquetting minimizes dust generation and improves working conditions. Standardized fuel: Unlike loose RDF with varying compositions, pellets and briquettes offer a consistent fu [...]

RDF/SFR/RPF pellets and briquettes are all related to waste management and renewable energy. While they share some similarities, they also have distinct characteristics: RDF: Stands for Refuse Derived Fuel. Made from processed municipal solid waste (MSW) such as plastic, paper, textiles, and wood. Processed by removing non-combustible materials like metal and glass. Can be compressed into pellets or briquettes for easier handling and transportation. Used as a fuel source in power plants, cement kilns, and other industrial applications. SFR: Stands for Solid Fuel Recovered. Similar to RDF, but with a highe [...]

All of the Pellet Mill supplied by PelletIndia.com are fully refurbished to a high standard. Each mill is run in at our factory to ensure we deliver a high-quality Mill for long lasting pelleting production. Tonnage Capacity Based on Materials Characteristics.    SYS 7900 Make: SYSType: 7930 – 7932 – 7936Year: 2012 – 2013 – 2014 – 2016 – 2018Die Diameter(mm): 762 – 825 – 915Die Width (mm): 94 – 115 – 156 – 180 – 210 – 240 – 275 – 313 – 356Die Surface (cm2): 2250 to 10230Die Speed (RPM): 150 & 210Die Linear Speed (mtr/sec): 5.9 – 6.4 – 7.1 – [...]

Hardwood and Softwood 1. Definition: Hardwood: Comes from angiosperm trees that are not monocots. These trees typically have broad-leaved foliage. Examples of hardwood trees include alder, balsa, beech, hickory, mahogany, maple, oak, teak, and walnut. Softwood: Comes from gymnosperm trees, which usually have needles and cones. Softwoods are often found in evergreen conifers. Examples of softwood trees are cedar, Douglas fir, juniper, pine, redwood, spruce, and yew. 2. Microscopic Structure: Hardwoods have visible pores (vessel elements) that transport water throughout the wood. These pores contribute to the prominent grain p [...]